{"title":"Leading Products","description":"","products":[{"product_id":"holders-for-focal-tweeters-ferrari-360-the-pair","title":"Ferrari 360 and 430 - Holders for Focal Tweeters - The Pair","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e2 Sets in stock\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eThese close replica of the original tweeter holders allow the tweeters to be directed towards the driver and passenger rather that towards the steering wheel as it is the case with the OEM design.\u003c\/p\u003e\n\u003cp\u003eThese holders are designed to fit the Focal TAM Tweeters with a mid-level tight fit. \u003cspan\u003eWhile the tweeters could hold fine when just pressed in, some customers, in particular those in warm climate and liking to slam the doors, may want to use a small drop of glue or double sided tape (not provided) on the back of the tweeter for a more secured fitting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eManufactured by MJF (Multi Jet Fusion) technology in heat resistant \u003cspan\u003ePA11-HP Nylon and dyed in Black. PA11-HP Nylon is heatproof up to 175 \u003cstrong data-processed=\"true\" data-sfc-cb=\"\" data-sfc-root=\"c\" class=\"Yjhzub\"\u003e°\u003c\/strong\u003eC \/ 347\u003cb\u003e°\u003c\/b\u003eF. \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDisplayed price is for the Pair. Tweeters are not included and are to be bought separately.\u003c\/p\u003e\n\u003cp\u003eIf you need a similar design for different tweeters, please contact us at contact@customparts.com to see whether we could adapt this design to fit your specific tweeters.\u003c\/p\u003e\n\u003cp\u003ePlease note that since this a 3D printed part, even if it uses high-end MJF printers, some minor lines can be visible from one manufacturing to the other, as you can see from closely looking at the pictures.\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":61380161831242,"sku":null,"price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Tweeters_3.jpg?v=1780583866"},{"product_id":"spider-lh-lever-66958900-replacement-ferrari-360-and-430","title":"Ferrari 360 and 430 Spider - LH LEVER - 66958900 - Replacement - Ferrari 360 and 430","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e2 items in stock\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eOEM Parts \u003cspan\u003e66958900 (Left Side) and 66958800 (Right Side) are parts of the 360 and 430 Spider roof mechanism which suffer from what I consider to be a well known manufacturing defect, as experienced by Sam Crac (https:\/\/www.youtube.com\/watch?v=y3y8405-nUQ\u0026amp;t=547s).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe issue?\u003c\/strong\u003e\u003cbr\u003eThe pin welded to the plate is only \"spot\" welded to the plate (instead of being fully welded all the way around), leading the weld to crack over time and leading (in my case) to the plate sharp corners coming scratching the roof tonneau and having to respray the tonneau.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDespite this part being cheap to manufacture, original 66958900 (Left Side) and 66958800 (Right Side) parts cost in the region of USD 380 + VAT.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/SamCracpicture.jpg?v=1773992904\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAchievable DIY solution:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWhile welding the pin back in place is a valid and cheap solution, welding it back at the very precise angle it came from factory can be challenging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOur Solution: 3D Printed part in stainless steel\u003c\/strong\u003e\u003cbr\u003eWe therefore 3D scanned the part, retro-engineered it, and got it 3D printed in stainless steel, leading to a much stronger 1-piece part.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePlease not that \u003cspan style=\"text-decoration: underline;\"\u003eour part is NOT the full 66958900 part but only the articulated part\u003c\/span\u003e. Our part screws in place of the OEM part to the flat bar that comes with OEM part 66958900 and that does not need to be replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Spider_Lever_-_Left_-_Disclaimer.png?v=1774018364\" alt=\"\"\u003e\u003cimg\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAlso note that the installation details and the mounted part showed here are for the Right side, but the Right side would be identical (just mirror of each other). If you order this product you will receive the side that you have ordered.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePS: this part could also CNC machined for c. 4x the price of the 3D printed part so we do not offer it on our shop. However, should you want a CNC machined version of it, please contact us on contact@360customparts.com so we can discuss a solution.\u003c\/span\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":61385120383306,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari_360_and_Ferrari_430_-_66958900_-_360CustomParts_-_LH_c76abddc-ee99-4947-b989-9fb72b317903.jpg?v=1777283138"},{"product_id":"throttle-body-adaptation-replacement-of-part-171716","title":"Brand New Throttle Body for Ferrari 360 -  Plug and Play - Replacement of OEM Part 171716","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eUpcoming price increase:\u003c\/span\u003e Due to the price of our sourced Bosch throttle bodies having increased, the price of our adapted throttle bodies will increase to USD 900 for orders made from September 1st 2026.  \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e16 items in stock\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eOEM Throttle body reference \u003cspan\u003e171716 (aka Bosch \u003cstrong\u003e0 280 750\u003c\/strong\u003e \u003cspan style=\"text-decoration: underline;\"\u003e038\u003c\/span\u003e) has been discontinued by Bosch*.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThis 171716 throttle body is nothing really more than a Bosch Throttle body reference \u003cstrong\u003e0 280 750\u003c\/strong\u003e \u003cspan style=\"text-decoration: underline;\"\u003e474\u003c\/span\u003e with a hole on the side to connect the return pipe for engine vapors.\u003cbr\u003eExcept the different Bosch reference number and the hole on the side, everything else is virtually identical between the Bosch 0 280 750 474 and the part sold by Ferrari under reference 171716.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePart 171716 \/ Bosch 0 280 750 \u003cspan style=\"text-decoration: underline;\"\u003e038\u003c\/span\u003e has many disadvantages:\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e - \u003cspan style=\"text-decoration: underline;\"\u003eNo Longer manufactured\u003c\/span\u003e (confirmed by Bosch official distributor)\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e - Specific to the Ferrari 360 =\u0026gt; no cross referencing possible\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e - Old stock items cost approximately c. USD 2,300 +VAT\u003cbr\u003e - Highly recommended to replace both throttle bodies at the same time to avoid voltage\/amperage imbalance between new\/old throttle body that could lead to Check Engine Line and entering into limp mode.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOur Solution: 3D printed Stainless Steel Adapter fitted on Bosch 0 280 750 \u003cspan style=\"text-decoration: underline;\"\u003e474\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003eWe retro-engineered the part that allows for the return pipe to be connected to the throttle body, and adapted it on still manufactured Original Bosch 0 280 750 474, commonly used on some Porsches (many 991s, Cayman, Cayenne, Macan, Cayman) and VW vehicles - a total of close to 2 million cars produced with that Bosch 0 280 750 474 throttle body, making it unlikely to create a bottle neck of sourcing for our beloved c. 17,000 Ferrari 360s (including Challenge Stradale).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe 3D printed part also integrates the fixing plate to fix the OEM plastic holder that holds the wiring loom so that the thickness between the head of the screw and the holding plate is identical to OEM.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that the internal diameter of the vacuum conduct is virtually identical to the OEM one (9.38mm vs 9.36mm as measured by digital caliper) ensuring a functionality virtually identical as OEM.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRigorous manufacturing process\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003e3D printing in Stainless Steel\u003c\/span\u003e\u003cbr\u003eThe part is 3D printed in 316L Stainless Steel using Selective Laser Melting (SLM) technology, followed at the manufacturing plant by thorough sand blasting and quality control. We selected 316L Stainless Steel on purpose for maximum strength, maximum ability to resist high temperature and vibrations.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eCleaning\u003c\/span\u003e\u003cbr\u003eOnce received by 360CustomParts, the part is cleaned with degreasing agent via ultrasonic cleaner at high temperature (80 C \/ 176F) for 30 minutes, the internal conduit thoroughly brushed to complete the cleaning, then thoroughly rinsed via ultrasonic cleaner at high temperature (80 C \/ 176F) for 30 minutes, and dried with compressed air.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFitting\u003c\/span\u003e\u003cbr\u003eFrom there, the part is fitted on a carefully and precisely drilled Bosch 0 280 750 474 \u003c\/span\u003e\u003cspan\u003eand is held in place via very snug fit and the original screws holding the throttle body in place. At the point of junction, the air seal is made by adding a small bead of RVT compatible for this application.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis results is an almost identical throttle body, plug and play with the original return pipe and overall fitting, but for c. 70% cheaper than the OEM version.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that for safety during transport, the 3D printed Adapter will be secured by 2 bolts\/nuts. These 2 bolts will need to be removed right before installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThoroughly tested over 1,000km+ on our own Ferrari 360:\u003cbr\u003e\u003c\/strong\u003eWe put our trust in our product to the test, swapping our fully functional OEM throttle bodies with our 360CustomParts throttle bodies and drove over 1,000km to test it in real world condition:\u003cbr\u003e - Driven up to \u003cspan\u003e250 Km\/h on Autobahn without any issue\u003c\/span\u003e\u003cbr\u003e - No reprogrammation needed (should you disconnect the battery before installation, the ECU will enter its normal relearn procedure)\u003cbr\u003e - No CEL (Check Engine Light)\u003cbr\u003e - Worked as OEM and as intended\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenefits of 360CustomParts throttle body vs OEM Throttle body refurbishment vs DIY solution:\u003cbr\u003e\u003c\/strong\u003eWith an OEM Throttle body refurbishment you get a refurbished 25+ year old throttle body that has been through 25+ years of vibration, thermal cycling, potentiometer sliding etc.\u003c\/p\u003e\n\u003cp\u003eOur 360CustomParts Throttle body offer key advantages over other solutions:\u003cbr\u003e - Use brand new Bosch throttle body with 100% new internals (casing, gearing, electronic) and external organs, never opened so optimized for long term reliability and with minimal risk of failure\u003cbr\u003e - Air-flow geometry as close as possible to OEM 171716 thanks to same positioning of return pipe and same internal diameter\u003cbr\u003e - Minimal visual difference vs OEM 171716\u003cbr\u003e - Fully plug and play without the need to reprogram ECUs\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstallation - Plug and play - no ECU reprogramming needed:\u003c\/strong\u003e\u003cbr\u003eAs per our own experience, our 360CustomParts Throttle body is totally plug and play and does not require any ECU reprogramming.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn some cases, in particular if the imbalance between your 2 OEM throttle bodies is important, it may be beneficial to \"Reset Adaptation Values Motorized Throttle\", and a simple USD 100 ThinkDiag OBD 2 reader can do it. On both ECUs (Left and Right) proceed as follows through the Thinkdiag menus (note the Ferrari 360 quirks that the Left ECU controls the Right TB and the Right ECU controls the Left TB):\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e360 Modena\u003cbr\u003e\u0026gt; F131 \u003cbr\u003e\u0026gt; Gasoline\u003cbr\u003e\u0026gt; System Selection\u003cbr\u003e\u0026gt; Electronic Injection (NCM)\u003cbr\u003e\u0026gt; Left\/Right Bank Motronic Bosch Engine Management System 7.3.1\u003cbr\u003e\u0026gt; Actuation Test\u003cbr\u003e\u0026gt; Reset Adaptation Values Motorized Throttle\u003cbr\u003eFrom here, with the ignition ON and the engine OFF, click OK and you should hear the Left\/Right throttle body activate and make rocky movement for c. 2 seconds. Repeat for the other side. Once done, the ECU data related to the throttle bodies will have been reset. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVisual explanations can be found here: \u003ca href=\"https:\/\/www.youtube.com\/watch?v=RernULeBXPc\"\u003ehttps:\/\/www.youtube.com\/watch?v=RernULeBXPc\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eInstallation:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease follow these steps precisely to avoid the return pipe to get disconnected from the throttle body leading to potential air leak.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e - Step 1: Remove the 2 bolts\/nuts\/washer holding the breather in place for transportation\u003cbr\u003e - Step 2: Secure the 360CustomParts Throttle body to the spacer using the 4 original bolts\u003cbr\u003e - Step 3: Once the throttle body is securely in place, then slide the rubber return hose on the return pipe\u003cbr\u003e - Step 4: Connect the Throttle Body using the OEM connector  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e1) The displayed price is for 1 throttle body. Should you want to replace both, please order 2 of our products.\u003c\/p\u003e\n\u003cp\u003e2) If you purchase this product you understand that this is a modified product from a genuine \/ brand new Bosch throttle body \u003cspan\u003e0 280 750 474, and the artisanal drilling and fitting means that some visual scratches could be visible on the finished product and that some minor adjustment have been done (including adjustment to the individual components). 360CustomParts spends over 45 minutes for each part to make sure the drilling is done properly, that no aluminum metal shaving is to be found in the finished product, that the RVT is properly dry before shipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"417\" data-end=\"678\"\u003eThe purchaser and installer assume all responsibility for the installation and use of this product. We are not responsible for any damage, injury, or loss resulting from improper installation, misuse, or failure to follow appropriate procedures.\u003c\/p\u003e\n\u003cp data-start=\"680\" data-end=\"849\"\u003eBy purchasing and installing this product, you acknowledge that modifications to a vehicle may affect its operation and reliability, and you accept all associated risks.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt is ultimately the responsibility of the client to use this product on their vehicle(s).\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclaimer:\u003c\/strong\u003e\u003cbr\u003eWhile our philosophy is to almost always charge 3-5x the manufacturing cost, this item is one of the very few exceptions that applies a higher rate due to the disproportionate amount of work done to retro-engineer this part and risk\/time taken to drill relatively expensive throttle bodies. For this reason, we apply the 3-5x pricing on the overall \"manufacturing + acquisition\" cost rather than just on the manufacturing cost.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*: as per email confirmation from Swiss official Bosch importer.\u003c\/span\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":61385194766666,"sku":null,"price":800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari_360_Throttle_Body_171716_-_Picture_1.jpg?v=1780043244"},{"product_id":"spider-rh-lever-66958800-replacement-ferrari-360-and-430","title":"Ferrari 360 and 430 Spider - RH LEVER - 66958800 - Replacement - Ferrari 360 and 430","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e2 items in stock\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eOEM Parts \u003cspan\u003e66958900 (Left Side) and 66958800 (Right Side) are parts of the 360 and 430 Spider roof mechanism which suffer from what I consider to be a well known manufacturing defect, as experienced by Sam Crac (https:\/\/www.youtube.com\/watch?v=y3y8405-nUQ\u0026amp;t=547s).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe issue?\u003c\/strong\u003e\u003cbr\u003eThe pin welded to the plate is only \"spot\" welded to the plate (instead of being fully welded all the way around), leading the weld to crack over time and leading (in my case) to the plate sharp corners coming scratching the roof tonneau and having to respray the tonneau.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDespite this part being cheap to manufacture, original 66958900 (Left Side) and 66958800 (Right Side) parts cost in the region of USD 380 + VAT.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/SamCracpicture.jpg?v=1773992904\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eAchievable DIY solution:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWhile welding the pin back in place is a valid and cheap solution, welding it back at the very precise angle it came from factory can be challenging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eOur Solution: 3D Printed part in stainless steel\u003c\/strong\u003e\u003cbr\u003eWe therefore 3D scanned the part, retro-engineered it, and got it 3D printed in stainless steel, leading to a much stronger 1-piece part.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePlease not that \u003cspan style=\"text-decoration: underline;\"\u003eour part is NOT the full 66958800 part but only the articulated part\u003c\/span\u003e. Our part screws in place of the OEM part to the flat bar that comes with OEM part 66958800 and that does not need to be replaced.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Spider_Lever_-_Right_-_Disclaimer.png?v=1774018323\" alt=\"\"\u003e\u003cimg\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePS: this part could also CNC machined for c. 4x the price of the 3D printed part so we do not offer it on our shop. However, should you want a CNC machined version of it, please contact us on contact@360customparts.com so we can discuss a solution.\u003c\/span\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":61385724035402,"sku":null,"price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari_360_and_Ferrari_430_-_66958800_-_360CustomParts_-_RH_0b3455c6-696e-4cd3-a30e-d1e7d0e59565.jpg?v=1777283246"},{"product_id":"spider-suport-lever-right-replacement-to-oem-66458800","title":"Ferrari 360 and 430 Spider - Suport Lever RIGHT - Replacement to OEM 66458800","description":"\u003cp\u003e\u003cstrong\u003e5 in Stock for immediate shipping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 3D printed part in heat resistant Nylon comes in replacement to OEM part 66458800 that typically costs USD 90 for a part that costs less than USD 2 to manufacture.\u003c\/p\u003e\n\u003cp\u003eFits both Ferrari 360 Spider and Ferrari 430 Spider.\u003c\/p\u003e\n\u003cp\u003eNote that the part is now black rather than grey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFair Pricing Disclosure:\u003c\/strong\u003e\u003cbr\u003eThis part costs c. USD 2 to manufacture in 3D printed MJF PA12-HP Nylon. I therefore apply a factor 10 here to reflect the time spent reverse engineering, ordering, shipping these etc.\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61386660512074,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/66458800-RoofSliderRight-1_1b3ecce3-97a9-44ca-93d2-d9af951c0270.jpg?v=1777291466"},{"product_id":"spider-support-lever-left-replacement-to-oem-66458700","title":"Ferrari 360 and 430 Spider - Support Lever LEFT - Replacement to OEM 66458700","description":"\u003cp\u003e\u003cstrong\u003e5 in Stock for immediate shipping\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis 3D printed part in heat resistant Nylon comes in replacement to OEM part \u003cspan\u003e66458700 \u003c\/span\u003ethat typically costs USD 90 for a part that costs less than USD 2 to manufacture.\u003c\/p\u003e\n\u003cp\u003eFits both Ferrari 360 Spider and Ferrari 430 Spider.\u003c\/p\u003e\n\u003cp\u003eNote that the part is now black rather than grey.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFair Pricing Disclosure:\u003c\/strong\u003e\u003cbr\u003eThis part costs c. USD 2 to manufacture in 3D printed MJF PA12-HP Nylon. I therefore apply a factor 10 here to reflect the time spent reverse engineering, ordering, shipping these etc.\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61386672996682,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/66458700-RoofSliderLeft-1_a5a51ae1-64cd-450b-97c3-254e006695d2.jpg?v=1777291184"},{"product_id":"ferrari-360-rear-view-camera-holder-no-drilling-plug-and-play-wiring-harness-exhaust-grill","title":"Ferrari 360 - Backup Camera Wiring Loom - Plug and Play","description":"\u003ch3 style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e10 items in stock\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eOur Ferrari 360 Backup Camera Wiring Loom allows to use the OEM reversing light connector to connect a reversing camera that will be fed in 12V when and only when the reverse gear is engaged.\u003c\/p\u003e\n\u003cp\u003eNote that while Ferrari 360 cars in Europe only use 3 of the 4 pins, our wiring loom makes all 4 pins functional via Automotive grade 18 AWG wires.\u003c\/p\u003e\n\u003cp\u003eAlso, to connect the + and - wires from your reversing camera to this wiring loom, you would need to buy a separate 2-Pin AMP Superseal connector and note the polarity of our wiring loom as shown in the picture in order to wire your camera properly.\u003c\/p\u003e\n\u003cp\u003eNote that this wiring loom is included in our 360CustomParts Backup camera kit, so does not need to be purchased separately. \u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":61387028627786,"sku":null,"price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/DSC4210.jpg?v=1778162247"},{"product_id":"aluminum-based-lateral-capote-flap-left-adaptable-for-66462000","title":"Ferrari 360 and 430 - Aluminum Lateral Capote Flap - Left - Adaptable for 66462000","description":"\u003cp\u003eFerrari 360 and 430 Spiders come with Lateral Capote Flaps \u003cspan\u003e66462000 and 66462100 made of fiber glass. Beyond the fact they can brake, with age, their material becomes brittle.\u003cbr\u003e\u003cbr\u003eThis retro-engineered flap are close copy of the OEM Flaps, made out of CNC machined 6061 Aluminum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that these flaps need to be painted and we recommend using 2 or 3 layers of 2K Epoxy Primer before painting with basecoat and then 2K clearcoat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that the thick aluminum washer and screw that would come with OEM part 66462000 does NOT come with our CNC machined Lateral Capote Flap, so would need to be removed from the OEM flap to be used on our Flap. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclosure:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThese flaps require a large block of aluminum and a extremely expensive 5-axis CNC machine to be manufactured. For this reason, they cost 360CustomParts approximately USD 140 to manufacture per unit. For that reason we apply a low multiplier of 3x to come to our price.\u003c\/span\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61388148769098,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari360andFerrari430-66462000-Replacementpart360CustomParts-1.jpg?v=1774449413"},{"product_id":"aluminum-based-lateral-capote-flap-right-adaptable-for-66462100","title":"Ferrari 360 and 430 - Aluminum Lateral Capote Flap - Right - Adaptable for 66462100","description":"\u003cp\u003eFerrari 360 and 430 Spiders come with Lateral Capote Flaps \u003cspan\u003e66462000 and 66462100 made of fiber glass. Beyond the fact they can brake, with age, their material becomes brittle.\u003cbr\u003e\u003cbr\u003eThis retro-engineered flap are close copy of the OEM Flaps, made out of CNC machined 6061 Aluminum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that these flaps need to be painted and we recommend using 2 or 3 layers of 2K Epoxy Primer before painting with basecoat and then 2K clearcoat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that the thick aluminum washer and screw that would come with OEM part 66462100 does NOT come with our CNC machined Lateral Capote Flap, so would need to be removed from the OEM flap to be used on our Flap. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclosure:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThese flaps require a large block of aluminum and a extremely expensive 5-axis CNC machine to be manufactured. For this reason, they cost 360CustomParts approximately USD 140 to manufacture per unit. For that reason we apply a low multiplier of 3x to come to our price.\u003c\/span\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61388170821962,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari360andFerrari430-66462100-Replacementpart360CustomParts-3.jpg?v=1774449359"},{"product_id":"aluminum-based-lateral-capote-flap-right-left-adaptable-for-66462100-and-66462000","title":"Ferrari 360 and 430 - Aluminum Lateral Capote Flap - Right \u0026 Left - Adaptable for 66462100 and 66462000","description":"\u003cp\u003eFerrari 360 and 430 Spiders come with Lateral Capote Flaps \u003cspan\u003e66462000 and 66462100 made of fiber glass. Beyond the fact they can brake, with age, their material becomes brittle.\u003cbr\u003e\u003cbr\u003eThis retro-engineered flap are close copy of the OEM Flaps, made out of CNC machined 6061 Aluminum.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that these flaps need to be painted and we recommend using 2 or 3 layers of 2K Epoxy Primer before painting with basecoat and then 2K clearcoat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote that the thick aluminum washer and screw that would come with OEM part 66462100\/66462000 does NOT come with our CNC machined Lateral Capote Flaps, so would need to be removed from the OEM flaps to be used on our Flaps. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclosure:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThese flaps require a large block of aluminum and a extremely expensive 5-axis CNC machine to be manufactured. For this reason, they cost 360CustomParts approximately USD 140 to manufacture per unit. For that reason we apply a low multiplier of 2.5x to come to our price.\u003c\/span\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61388213485898,"sku":null,"price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari360andFerrari430-66462000and66462100-Replacementpart360CustomParts-2.jpg?v=1774449285"},{"product_id":"ferrari-360-gear-set-for-air-opening-65159900-1-set","title":"Ferrari 360 - Gear Set for Air Opening 65159900 - 1 Set","description":"\u003cp\u003eRetro-engineered gears for Air Opening reference 65159900. Retro-engineered gears for Air Opening reference 65159900. Made out of BambuLab PTEG-Carbon Fiber on FDM 3D printer. Ready to ship immediately. Should you prefer Nylon based parts for the same price but longer lead-time, please contact us.\u003c\/p\u003e\n\u003cp\u003ePlug and play and allow normal operation of air flap.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclosure:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThese gears cost approximately USD 2.5 and 25 minutes to manufacture of a standard FDM 3D printer (planning to move to SLM Nylon should there be sufficient demand). Due to likely small market demand and time spent to retro-engineer and test 7 iterations, as well as to 3D print we need to apply a higher multiple than our standard policy. However, should you need to replace the full set of gears on the 5 vents, we also offer a full set of 5 at a 50% discount compared to individual items.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61461944303946,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari360and430-Gearsfor65159900-1.jpg?v=1774778034"},{"product_id":"ferrari-360-gear-set-for-air-opening-65159900-5-sets","title":"Ferrari 360 - Gear Set for Air Opening 65159900 - 5 Sets","description":"\u003cp\u003eRetro-engineered gears for Air Opening reference 65159900. Made out of BambuLab PTEG-Carbon Fiber on FDM 3D printer. Ready to ship immediately. Should you prefer Nylon based parts for the same price but longer lead-time, please contact us. \u003c\/p\u003e\n\u003cp\u003ePlug and play and allow normal operation of air flap.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFair pricing disclosure:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eThese gears cost approximately USD 2.5 and 25 minutes to manufacture per set of a standard FDM 3D printer (planning to move to SLM Nylon should there be sufficient demand). We apply a ratio of c. 5x for this set of 10 gears (5 large and 5 small).\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61461944533322,"sku":null,"price":62.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari360and430-Gearsfor65159900-1.jpg?v=1774778034"},{"product_id":"ferrari_360_backup_camera_plug_and_play","title":"Ferrari 360 - Backup Camera - Plug and Play","description":"\u003cp\u003ePlug and Play, fully reversible Backup Camera for Ferrari 360 integrated to Ferrari 360 style central and exhaust grilles.\u003c\/p\u003e\n\u003cp\u003eThe grille style is inspired by the same hexagonal design as the engine hood grille.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with:\u003c\/p\u003e\n\u003cp\u003e - 1 Central grille + 2 Exhaust grilles : all made from FiberLaser Cut 2mm aluminium sheet - powder coated\u003cbr\u003e - 1080p \/ rotating \/ 170 wide angle \/ adjustable reversing camera, to be connected to non-OEM unit via a 6M RCA cable (note that radio unit is not provided and would need to be purchased separately)\u003cbr\u003e - Stainless Steel 3D printed holder to hold the camera behind the central grille + necessary stainless steel screws\/bolts - Includes small hole on the side to adjust camera's angle as needed\u003cbr\u003e - Heat sleeve to protect camera wiring loom from exhaust heat\u003cbr\u003e - Wiring loom to directly connect the camera to the car's reversing light wiring loom - no wire cutting, fully reversible\u003cbr\u003e - 6m of RCA cable to run from camera to head unit\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003eShows pictures of in-situ effect on:\u003cbr\u003e - Power Acoustik CP-71WA\u003cbr\u003e - Pioneer \u003cspan\u003eSPH-EVO98DAB\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61469641408842,"sku":null,"price":700.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/Ferrari_360_RearView_Camera_Grill_7.jpg?v=1777476339"},{"product_id":"ferrari-360-speaker-grille-holders-kit","title":"Ferrari 360 - Holders for OEM Speakers Grilles - Fit Focal 6.5\" Speakers","description":"\u003cp\u003e\u003cstrong\u003eIn Stock - Print on demand - 48h lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit allows you to reuse the Original Grilles from the Ferrari 360 Door Speakers and fit them on Focal 6.5 speakers while using the OEM screws positioning in the door panel. This allows to keep the look 100% OEM despite having Focal Speakers installed behind the grilles.\u003c\/p\u003e\n\u003cp\u003eThe only modifications to make are:\u003cbr\u003e - You would need to drill an additional hole to the Focal speakers so that the 3rd screw fit properly to the door panel holes\u003cbr\u003e - You would need to remove the OEM Speaker grille by ungluing the plastic holder that is glued to the OEM speakers and then unbend the 4 taps of each grille, to be reused on the 360 Custom Parts Grille holders. You will note that the grilles have 3 tabs of the same size and a 4th smaller tab. The Holders have the same 3 large \/ 1 small holes to fit the OEM grille.\u003c\/p\u003e\n\u003cp\u003eThe kit comes with:\u003cbr\u003e - 2 antivibration gaskets made in TPU85A. This gasket needs to be sandwiched between the Focal speaker and the grille holder\u003cbr\u003e - 1 Driver side Grille Holder\u003cbr\u003e - 1 Passenger Grille Holder\u003c\/p\u003e\n\u003cp\u003eNote that this kit is 3D Printed in Black ASA (to support temperatures of c. 85 degree Celsius) using a BambuLab 3D printer so the layers are visible and the supports will have left some marks at the bottom of the print for the supports (see pictures) but these are not visible from the outside once the grilles are fitted in place.\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61842106548554,"sku":null,"price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/DSC4226.jpg?v=1778852200"},{"product_id":"ferrari-360-radio-rear-frame-holder","title":"Ferrari 360 - Radio rear frame holder","description":"\u003cp\u003e\u003cstrong\u003eIn Stock - Print on demand - 48h lead time\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Ferrari 360 OEM Becker radio is held at the back by a plastic prong finding its way in a hole at the back of the radio, helping maintain the radio horizontal and reducing the stress on the front multi-layer composite structure.\u003c\/p\u003e\n\u003cp\u003eReplacing the Becker radio by another 1-Din Unit means the rear of the radio is not supported anymore, leaving all the weight and the stress left to the front composite structure.\u003c\/p\u003e\n\u003cp\u003eThe 360 Custom Parts Radio rear frame holder allows to support any 1-Din radio at the rear, hence reducing the stress on the front panel and reducing the risk of cracking over time.\u003c\/p\u003e\n\u003cp\u003eThe large openings at the rear of the holder allow to have numerous wires go through them and below the rear supporting bar.\u003c\/p\u003e\n\u003cp\u003eThe holder is specifically designed to be inserted through the bottom of the radio console (the ventilation controle module needs to be removed - see picture) with the word \"TOP\" facing up, and then the 1-Din aluminium frame that comes with the radio can be put in place as intended, but with its back inserted in the, 360 Custom Parts Radio rear frame holder, itself with its peg inserted in the OEM hole at the back.\u003c\/p\u003e\n\u003cp\u003eOur radio holder is 3D Printed in PETG-Carbon-Fiber for improved rigidity. Note that due to the manufacturing process, line marks and support points are visible. Also note that the 1-DIN metallic casing is not provided (usually comes with the head unit).\u003c\/p\u003e","brand":"360CustomParts","offers":[{"title":"Default Title","offer_id":61856273203530,"sku":null,"price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1029\/5761\/3386\/files\/DSC4661.jpg?v=1779046825"}],"url":"https:\/\/www.360customparts.com\/collections\/leading-products.oembed","provider":"360CustomParts","version":"1.0","type":"link"}